E-mail: sales@winnix.net

                        R2000 Chip High Power Uhf Rfid Reader Module with Four Antenna Ports

                        Products Mode: HYM750P
                        Chip: Impinj R2000
                        Fixed Current: ≤1.2 A
                        Fixed Power: 30dBm
                        Stepping Interval: 1dBm
                        Tag Protocol: EPC C1G2/ISO18000-6C
                        Typical Read Range: 10m with 8dBi rfid antenna

                         

                        tubiao.png Brief introduction

                        HYM750P UHF RFID reader uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz,with LBT function(Customizable). It supports dense reader working mode (DRM). Max Power is 31dbm.With standard 8dBi antenna,the reading distance can reach 15meters, maximum identifying speed can reach 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc. It is well used in high performance fixed readers.

                         

                        tubiao.png Technical data

                        No Item Technical data Unit Remark
                        1 Max current 1600 mA Max power output
                        2 Standby current ≤1 mA EN pin low level
                        3 Frequency range 840~960 MHz  
                        4 Defaul working frequency Frequency hopping MHz Frequency interval 250KHz
                        5 Channel bandwidth ≤250 KHz  
                        6 Frequency hopping speed ≤2 s  
                        7 Fixed power 31 dBm  
                        8 Stepping interval 1 dB 5~30dBm, adjustable by software
                        9 Label protocol EPC C1G2
                        /ISO18000-6C
                           
                        10 Communication protocol Asynchronos serial ports protocol    
                        11 Starting time ≤50 ms  
                        12 Radio-frequency power rising time ≤500 μs  
                        13 Radio-frequency power droping time ≤500 μs  
                        14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
                        ≤-60 dB ±2CH
                        15 Frequency stablizing ratio ±10 ppm -25℃~+40℃
                        ±20 ppm -40℃~+60℃
                        16 Max reading range >15 m 8dBi antena
                        17 Muti-tags >400/s    


                        tubiao.png Characteristics of DC

                        Data Mini value Typical value Max value Unit Remark
                        Voltage of power 3.3 4 5.5 V Direct current
                        Input high level 2 3.3 3.5 V GPIO
                        2 3.3 3.5 V EN
                        Input low level -0.5 0 0.5 V GPIO
                        - - 0.18 V EN
                        Output high level 2.3 - 3.3 V GPIO
                        Output low level 0 - 1 V GPIO
                        Enable current 2 5 25 uA VEN≥2V


                        tubiao.png Requirement on antenna

                        No Item Technical data Unit Remark
                        1 VSWR ≤1.5    


                        tubiao.png Appearance and structure

                        • Size: 76.5×39.7×9mm
                        • Weight: 50g

                        1.jpg

                         

                        tubiao.png Interface definition

                        Pin Signal name Signal direction Function/compatibility description
                        1 VCC Input Module supplying power
                        2 VCC Input Module supplying power
                        3 GND - Module connecting ground
                        4 GND - Module connecting ground
                        5 EN Input Module enabling,highly effective
                        6 GPIO Bidirection Generic port
                        7 GPIO Bidirection Generic port
                        8 GPIO Bidirection Generic port
                        9 UART_RX Input Asynchronous serial interface receiving
                        10 UART_TX Output Asynchronous serial interface sending
                        11 DBG_RX - Test port
                        12 DBG_TX - Test port


                        tubiao.png 6pin debug Interface definition

                        Pin

                        Signal name

                        Signal direction

                        Function/compatibility description

                        1

                        VCC

                        Input

                        Module supplying power

                        2

                        GND

                        -

                        Module connecting ground

                        3

                        EN

                        Input

                        Module enabling,highly effective

                        4

                        GPIO

                        Bidirection

                        Generic port

                        5

                        UART_RX

                        Input

                        Asynchronous serial interface receiving

                        6

                        UART_TX

                        Output

                        Asynchronous serial interface sending

                        NOTICE:The 6 pin interface is for debug

                        tubiao.png Environment requirement

                        No Item Technical data Unit Remark
                        1 Working temperature -25~+75  
                        2 Storage temperature -40~+85  
                        3 Relative humidity 10%~90% RH  

                         

                        在线不卡高清播放AV网站