Electrical Properties: It is a general antenna for UHF RFID applications with high gain and low VSWR.
Mechanical Properties: The compact and artistic antenna is suitable for all kinds of severe environment for its dual waterproof design with gasket and silicone and strengthening rib of shell.
Maximum VSWR: ≤1.3:1
Gain:> 5 dBi
H side HPBW: 70°
E side HPBW: 70°
Polarization: Circular Polarization
Relative humidity: 5%～95%
Input Impedance: 50 Ω
Antenna Connection: SMA-50KFD（external thread female）
Weight: 0.3kg (without bracket)
Material: Engineering Plastic ASA、Aluminums
Enclosure Rating: IP67
Operational Temperature:-40℃~+ 85℃
Storage Temperature: -40℃~+ 85℃
The antenna can be installed on steal framed structure or bracket by own antenna bracket, and connect with reader with coaxial line. The antenna can be installed horizontally or vertically, it is decided by installation location, the angle can be adjusted after installation according to the real environment.
Antenna bracket is an optional accessory, you can choose according to your special requirement.
Step 1：Fix the L board on the antenna by using M6 screw,elastic washer and plain washer, please see Figure 3.
Step 2：Please use M6 screw,M6 U style screw bolt elastic washer and plain washer and “Dog tooth” to fix antenna on pole , as shown in Figure 5.
Antenna performance figure
Common Problems and Attentions:
1. The antenna is a circular polarization antenna. Please kindly adjust the angle to get the best reading performance in practical applications.
2. The antenna can be used at the outdoor environments, but it’s not good to use it in an acid/alkali environment.